skip to main content
REMBE® Kersting GmbHREMBE® Kersting GmbH

Truck Sampling System

A truck bulk sampling system is a specialized method of taking representative samples from a truck transporting bulk materials such as grain, coal, minerals, or other loose materials. This system is designed to perform sampling efficiently, safely and hygienically. Here are some key components and features of a typical truck sampling system:

  1. Automated or manual sampling: Depending on the specification, the sampling system can be operated either fully automatically or manually. Automated systems typically provide greater accuracy and consistency.
  2. Sampling point: The sampling point is usually designed to provide easy access to the bulk material in the truck. This could be done through the upper or lower reaches of the truck, depending on the type of material and the sampling system.
  3. Sampling device: The actual sampling device can take different forms, depending on the requirements of the specific materials. It could be a shovel, probe, slider or other device capable of taking a representative sample.
  4. Sampling patterns: The system should be programmed to take samples in a predetermined pattern to ensure that the sample is representative of the entire bulk material.
  5. Contamination prevention: The sampler should be designed to be cleaned between samples to avoid cross-contamination between different batches.
  6. Storage and transport containers: Once collected, the sample is stored in specially designed containers that keep the sample in good condition until it is analyzed.
  7. Control and monitoring: Modern sampling systems can be monitored and controlled via a central control unit, which makes it possible to accurately control and document sampling.
  8. Safety precautions: Since the sampling of bulk material can be hazardous, the systems should be equipped with appropriate safety precautions to protect both personnel and material.
  9. Incorporation into laboratory processes: Some advanced systems can be integrated directly with laboratory information systems to enable seamless routing of samples for analysis.

So, a truck sampling system for bulk materials can include a combination of mechanical hardware, control software, and specialized procedures to provide precise, efficient, and safe sampling. It helps to ensure the quality and integrity of the samples and helps to meet the requirements of the food and materials industry for monitoring and quality assurance.